Spark plugs removing of chevy cobalt?

I have looked in the owners Manuel and i do not see how to remove the spark plugs in a 2005 Chevy cobalt. does anyone have any pictures on how to remove the spark plug cover that is on top.Spark plugs removing of chevy cobalt?If you can't even remove the cover, you might want to have someone else change your plugs for you.

Most GM cars have plastic covers that just pull off and clip back on. Don't yank it hard enough to break it though. If it isn't the clip on type, there should be an obvious bolt head showing. If that doesn't work tug on it around the edges and wherever you feel resistance is where there will be a bolt or wing nut you need to remove.Spark plugs removing of chevy cobalt?Look for the oil fill cap, if it has an extended neck that goes through the plastic cover on the part of engine towards the radiator. You need to grasp the long part below the cap and give it a counterclockwise twist, then remove neck with cap on it. Lift up on plastic cover, there is an extension tab on back of engine then slide towards yourself. Good LuckSpark plugs removing of chevy cobalt?Remove oil fill cap on drivers side of enginge, remove plastic shield bly lifting straight up on it. , look at top of engine, you should see you ign module on the top which should also say eco-tec 2.2 or 2.0 of 2.4 which ever motor you have. remove CPA clip and disconnect IGN module just the wires not the module from the coils. remove the 4 bolts that you can see on the at cover. pull straight up, be very careful not to pull off at angle or you may damage the coil/sparkplug boots. Use a 6%26quot; extension with sparkplug socket to remove plugs.