Friday, September 23, 2011

How do you change the spark plugs in a '99 SAAB 9-5 SE?

I was wondering if it would be a good idea to take a shot at it myself. I figure it will be hard and require a full days work, but if I can save the 100+ dollars firestone wants to charge, its worth learning. What kind of spark plugs do I need? The guy at autozone gave me platinums.How do you change the spark plugs in a '99 SAAB 9-5 SE?There is a good web site that will give you step by step instructions as well as pictures on how to do it. Also, it gives you a page to order the plugs you need. It is:



http://www.thesaabsite.com/95/95faqs.htm



Here is the page to order the plugs from Bosch:



http://www.thesaabsite.com/95/95ignition



Here is the link to how to change the plugs:



http://www.thesaabsite.com/Sparkplugremo



With those two web pages, you should be set. I have followed them myself with no problems.How do you change the spark plugs in a '99 SAAB 9-5 SE?I assume you have the 4 cylinder model and didn't get the upgrade to 6 cylinder. Changing the spark plugs is one of the easiest procedures on Saab vehicles. Take out the 4 bolts that hold down the Direct Ignition cassette. It is right on top and has %26quot;Direct Ignition%26quot; imprinted on it. Pull up on the Direct Ignition cassette and put it off to the side. You now have direct access to the spark plugs and can remove them in the normal way with a spark plug socket and a short extension on your ratchet. If you have the plugs properly gapped when you start the job, it shouldn't take you more than 30 minutes even if this is your first time.



BTW, Platinum plugs are not recommended for Saabs - they can cause engine performance problems and premature Direct Ignition cassette failure. The standard, copper core resistor plugs, preferably NGK (but I have also used Champion and Delco without any problems) are recommended. Change them every 20,000 miles.

How much would it cost to get spark plugs/wires replaced?

It would be on a 93 Olds Cutlass Ceira.how much would it cost for parts and/or labor?How much would it cost to get spark plugs/wires replaced?About $65 for parts and $50 for labor at a dealer's shop where you will get the Original Equipment Manufacturer's (OEM) set of spark plug wires installed. If you need spark plugs, now's the time to have that done too. The new spark plugs only cost about $12, but the labor to install them varies from car to car. Probably another $50 to install the plugs, for a total of $177.How much would it cost to get spark plugs/wires replaced?i dont know about labor but the parts shouldnt be more than 100$ in the us if you go to autozone the work is really easy you should do it your self because evean with the caust of the tools it would be cheaper than taking it to someone and you can return the tools after the work if you have no need for them afterwordsHow much would it cost to get spark plugs/wires replaced?Parts should run between $45 and $50. Should take less than half hour but many shops have an hour minimum rate. shade tree mechanic would be your best bet
  • white hair
  • Free quilt patterns for baskets
  • Would I be able to replace my rotor, cap and spark plugs on my 95 toyota celica by myself?

    I have no auto repair experience but from how to articles I've read on the internet, it seems pretty straightforward. Is this an easy thing to do, and if so, got any tips to give me? It seems I'll save around $200 by doing it myself.

    Thanks!Would I be able to replace my rotor, cap and spark plugs on my 95 toyota celica by myself?HI

    Yes that is pretty basic stuff. Should be done with the motor cold so you don't strip the head as its aluminum and well swell when its hot so the plugs well be held to tight.

    1) Just remember to change the plugs one at a time so you get the right wire back on the right plug.

    2) When doing the cap mark the front of the old one, then pull it off the distributor, in stall the new one (they well only go on one way and lock down) then remove the wires out of the old one, one at a time and put it in the new cap in the same location.

    3) the rotor well only go on one way as well.

    4) you should get a spark plug gapper and check the gaps on the new plugs before you install them. they are not always gaped right from the factory. You can get the gap information form the parts house.

    good luck

    timWould I be able to replace my rotor, cap and spark plugs on my 95 toyota celica by myself?thats totally up to you and whether you think you can do it or not but if you decide to you have to wait till your engine is cold well not cold but like semi-warm cause youll strip the spark plug if you do it while its hotWould I be able to replace my rotor, cap and spark plugs on my 95 toyota celica by myself?

    first you have to have the tools then know where the parts are that you need to replace. Then carefully remove the spark plug wires so you do not break, same for plugs. For the first time you really need someone to show you otherwise you could damage something. Is this a cyl or V6. the V6 is more difficult.

    I need to know how to change spark plugs in a 2004 chevy aveo?

    i can change spark plugs. but i was confused when i opened the hood there was a box next to it %26amp; no spark plugs how do i go by changing them.I need to know how to change spark plugs in a 2004 chevy aveo?Remove the hex head bolts (4), and pull the cover up. Remove the plug wires and plugs one at a time. Don't forget to use a small amount of anti-seize on the new plug threads.



    Have you had the timing belt replaced yet? The service interval is 60k miles, and the engine can be severely damaged if it breaks.I need to know how to change spark plugs in a 2004 chevy aveo?you first need to remove the black cover that goes cover the engine, it has to be removed before you can see the spark plug wires under it, it may require allan wrenchI need to know how to change spark plugs in a 2004 chevy aveo?never worked on an aveo but i looked at a picture on the web and it looks like there is a plastic cover that has to be removed. if your looking at the engine on the drivers side you can see the ignition box with the spark plug wires coming out and going under the cover. looks like four screws hold it in place. take that off and the follow the wires. you might need a long extention to get at them as this is a dohc engine and the plugs might be deep in the engine.I need to know how to change spark plugs in a 2004 chevy aveo?take the spark plug caps off, put wrench on plugs. turn left, remove. insert new plugs, put wrench on plugs, turn right, re insert caps on plugs.

    Whats the best spark plugs to buy for my 2005 Honda accord EX?

    I do a lot of stop and go, and a lot of highway, so my driving habits are mixed. What are the best possible plugs I can put in my car? Also I think I'd rather save fuel than boost performance. I don't care how much these cost, just looking for the best.Whats the best spark plugs to buy for my 2005 Honda accord EX?There is a lot of good spark plugs in the market but the question is what spark plug is the best for your Honda. I suggest you go for NGK. Its the factory spark plugs recommended for your car and will ensure matching good performance with your car and will last longer than putting high end spark plugs that is not match with your car. Hope this help!Whats the best spark plugs to buy for my 2005 Honda accord EX?Spark plugs do not boost performance or mpg unless the old ones were so worn out they were misfiring. Replace with the same ones Honda put in there for the best results.Whats the best spark plugs to buy for my 2005 Honda accord EX?Go to Honda's parts counter and buy plugs from them. Working at Toyota, I can't tell you how many people come in complaining of poor gas mileage %26quot;for a while%26quot;. When we look into their service history and don't see spark plug replacement, we ask, and 9 times out of 10 its %26quot;I put in those (insert aftermarket platinum or double tip plug here) and I've been noticing it since%26quot;. Duh! Put in the factory NGK's and they come back much more often, knowing that we have the correct parts and advice for them, not their local shop with Bosch Platinum Double Tip Hot Spark 200K mile lifetime warranty super plugs. Go to Honda, pay more now, save money later. They'll have the parts that your car was made to use.Whats the best spark plugs to buy for my 2005 Honda accord EX?i believe it is ngk

    i have used ngk iridium only

    6.99 a piece

    there is another top one of ngk that is 13.99 a pieceWhats the best spark plugs to buy for my 2005 Honda accord EX?The 2004 V6 accord I did today took Denso spark plugs and they are due every 105k.

    How do I access the rear spark plugs on a 2002 Ford Taurus; 6-cyl.?

    2002 Ford Taurus; 6-cyl.; 3.0L

    The rear plugs are buried and incredibly difficult to get to without removing parts -- but what and how exactly do I need to remove?How do I access the rear spark plugs on a 2002 Ford Taurus; 6-cyl.?What engine is the Taurus equipped with? Is it the 3.0L OHV V6 (eighth digit of VIN 'U'), or the 3.0L Duratec DOHC 24-valve V6 (eighth digit of VIN 'S')? If it's the 3.0L OHV V6, access should be relatively straightforward. You may need to use a short extension and a swivel type socket, but it's still fairly easily accessible. If you are referring to the 3.0L Duratec engine, you need to unbolt the upper intake plenum to access spark plugs to bank #1. Doing so is a relatively simple task. Just remember to unbolt the EGR tube first. Hope this helps.



    ADDED: As I've advised, you will need to remove the upper intake plenum to access the spark plugs on bank #1 cylinders The only tools needed for this are a 5/16%26quot; socket with suitable extension and 10mm for the two EGR valve bolts if you don't have the 1-1/16%26quot; wrench for the EGR tube. The gaskets between the two should be reusable, unless it is absolutely oil soaked and squished, which even if, they aren't expensive.How do I access the rear spark plugs on a 2002 Ford Taurus; 6-cyl.?You're Welcome. Glad to be of help. I told you it was simple.

    Report Abuse

    How do I access the rear spark plugs on a 2002 Ford Taurus; 6-cyl.?Before you remove parts try going in through the wheel well. On some cars that's the easiest way, jacking it up and removing a wheel. Just make sure you use a jack stand, under the suspension, before doing any work. Working with a car on a jack is dangerous as they aren't very stable and the car could fall on you.How do I access the rear spark plugs on a 2002 Ford Taurus; 6-cyl.?Honestly, I do not know about the Taurus, but I think my 2001 Escape 6 cyl has the same engine. I had the same problem and we, unfortunately, had to have the manifold removed to get to the coils and plugs. I hope your mechanic is very nice to you and keeps it relatively cheap. Good luck.

    How do I change the spark plugs on a 1994 Chevy Corsica?

    The garage quoted me $300 to change them since the engine is mounted sideways.How do I change the spark plugs on a 1994 Chevy Corsica?I assume you have the 3.1 V-6 engine...



    The rear are the hardest, yet I can change them all in about 15 minutes. Just remove the ignition coil brackets, lift the unit up and out of the way. Make sure you mark what wires go where I get the firing order.



    Then reach back and pull the ignition wires off the spark plugs. Use an extension bar and spark plug socket to remove the spark plugs. One at a time....



    Install in order and your done. Reinstall ignition coil and you just save around 280.00 :)How do I change the spark plugs on a 1994 Chevy Corsica?All you need to do is find your spark plug wires and follow them to the engine. Pop them off one at a time and use a deep well socket (probably 5/8) and a ratchet (you might also need an extention) to take the plugs out. You'll need to check your spark plug gap before putting the new ones in, you can get the little tool at the auto parts store (just ask), and they might even be able to tell you there what the gap needs to be. Be sure you put the new plug in (tighten until just snug, don't crank the crap out of it) and replace the wire (use a little dielectric grease inside where the wire fits over the plug) before moving onto the next or you may get them mixed up and your firing order will be screwed up, therefore your car won't run.How do I change the spark plugs on a 1994 Chevy Corsica?go get you a rachet socket set make sure that you get an extended bar so you can reach the spark plugs do it yourself it's not hard and you can borrow the tools and that way all you have in it is the cost of the plugs and a little bit of your time.How do I change the spark plugs on a 1994 Chevy Corsica?Yes I've heard it's called the three plug tune up, because you have to be a contortionist to change the rear plugs......it's done from under the car reaching up between the firewall...$300 is probably a good deal...........
  • search myspace
  • ie hosted control
  •